Brother Scanner: Connections Error 03

If you see the below after selecting Centralis Outbound or Centralis Inbound try these steps

First click on the wrench and screw driver icon to access the settings

Then select Network

Then select Wired LAN

Scroll down and click on Wired Status 

Is should say Active

if it doesn't then scroll to the bottom of the menu to Wired Enable and see if it is off or on

If off then turn it on 

Scroll back up and click on Wired Status and see if the status is now Active

Once active give the scanner 1-5 minutes to recalibrate and click the Centralis Outbound or Centralis Inbound button again to see if you are now connected.